Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Cap & Crown in Doylestown: What to Know First
If you own an Olympia Chimney system in Doylestown and the cap is rusted through or the crown is cracking, we can help. We’re an independent Olympia Chimney service provider, not a factory affiliate, and we handle cap installation, cap replacement, crown repair, crown coating, multi-flue caps, and custom cap work on Olympia products all over Bucks County. Most cap and crown jobs take one visit, often under two hours on the roof. Pricing is always quoted before a tool comes off the truck, and we’ll tell you plainly if the job can wait. Call (484) 600-2977 for a specific number.
This page is for Doylestown homeowners who want the straight story on Olympia cap and crown failures, what they cost to fix, and when it’s time to stop patching and start replacing.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia multi-flue caps with mesh sidewalls clog fast in Doylestown’s tree canopy. The West Side, around the Mercer Museum neighborhood, has mature maples and oaks dropping seeds and helicopter pods that work into the mesh and choke airflow. A clogged Olympia cap drafts like a blocked flue, and the fix is usually a removal, a deep cleaning of the mesh, and a reset rather than a new cap. We see this enough that we check mesh condition on every Olympia cap we touch.
- Olympia stainless steel caps can rust at the rivet points, not the body. The sheet metal holds up, but the rivets and screen edges are where moisture sits. In Doylestown winters, freeze-thaw cycles at those weak points open hairline gaps. We replace with marine-grade stainless fasteners when we rebuild, which is a small detail Olympia’s own literature doesn’t cover.
- Olympia crowns develop hairline cracks along the flue tile edge before the field gets bad. The pour is generally solid, but the expansion joint between the tile and the crown is a stress point. Water wicks in, freezes, and spalls the crown corner. We seal with a crown coating system that flexes with the masonry, and we’ll tell you if the crown is still structurally sound before we coat.
- Olympia single-flue caps on brick chimneys can loosen in wind. Bucks County gets gusts that rock a clamp-mounted cap that wasn’t torqued down right. We’ve found loose caps on Doylestown roofs where the homeowner had no idea, and a loose cap turns into a cracked crown. We re-bed and torque every cap we service, even if the original install wasn’t ours.
- OEM Olympia caps are good, but the screen tends to be lighter gauge than the lid. The top plate is sturdy; the mesh is where rust starts first. We offer quality aftermarket caps with heavier screening when the Olympia part is on backorder or when the owner wants a longer service interval. Either way, you’ll see the part before we put it on.
Our Olympia Chimney Chimney Cap & Crown Process
- 1
The call. You reach a live person, day or night. We ask what the chimney’s doing, what you’ve seen, and whether you’ve had any water in the firebox. Nothing gets quoted over the phone without eyes on the chimney.
- 2
The inspection. Wendell or one of the crew gets on the roof in Doylestown and photographs the existing Olympia cap and crown. You get the pictures, not just a summary.
- 3
The verdict. We go over what’s failing and what can wait. If the crown has life left, we say so. If the cap has a season or two in it, you’ll hear that too. No one needs a surprise $2,000 bill for a chimney that’s fine.
- 4
The repair or replacement. OEM Olympia part when it makes sense; quality aftermarket when it’s the better call for your roof. We explain the difference and the price before ordering anything.
- 5
The test and cleanup. After install, we check the draft and the seal. Then we leave the roof the way we found it, minus the bad cap.
- 6
The 90-Day Done Right Promise. If anything we touched isn’t right, one call brings us back. It’s in writing on every job.
What Olympia Chimney Chimney Cap & Crown Costs in Doylestown
Here’s what Doylestown homeowners typically pay, based on what we’ve seen on Olympia chimneys in this area:
- Single-flue Olympia cap replacement: $225 to $475 installed
- Multi-flue Olympia cap (custom or standard): $450 to $900 installed
- Crown repair (localized crack fill and seal): $350 to $650
- Full crown re-coating: $700 to $1,400 depending on crown size and access
- Crown rebuild (structural): $1,800 to $3,500, and we’ll tell you if this is truly needed
What moves the price: roof pitch, chimney height, flue count, and whether the old cap is seized or the crown needs more than a coat. A steep two-story roof in Doylestown’s historic districts takes longer, and time is the cost. Call (484) 600-2977 for a free estimate, and remember we offer $40 off any repair over $200 and a 10% discount for seniors and veterans.
Why Doylestown Homeowners Call Top Hat Chimney for Olympia Chimney Work
Wendell Pike started Top Hat Chimney in 1999, and he’s been working chimneys across Bucks County ever since. Before moving east, he learned the trade through the building trades program at Palomar College, then put in the hours on roofs until nothing surprised him. In Doylestown, he’s known for honest inspections. If your Olympia cap doesn’t need replacing, we’ll say so and charge you for what it did need. Tell me what it’s doing, and I’ll tell you what it needs.
We also work with the other brands you might have on the same roof: DuraFlex liners, HeatShield repairs, Gelco caps. That matters because an Olympia cap on a chimney with a liner issue is two problems, and we can sort both in one trip. Upfront pricing, background-checked crew, and a warranty that’s actually in writing. No voicemail box, no call center. When you call, a person answers.
FAQs
No. Olympia’s warranty covers manufacturer defects in their parts, not normal wear from weather, animals, or Doylestown freeze-thaw cycles. We install to Olympia’s specifications, and using a quality aftermarket cap doesn’t void your chimney system warranty. If you’re unsure, we’ll walk you through your specific Olympia model’s terms before any work starts.
The simplest tell is rust at the rivet points or bent mesh that won’t hold its shape. If the cap is dented, pulling away from the flue, or the screen is rotted through, cleaning won’t fix it. We’ll show you photos and a plain-English verdict before we recommend anything.
Yes, for most builds. Olympia offers several finishes, and we can order a custom multi-flue cap in a color that suits your brick or stone. It takes a little longer, but the price difference is modest. We’ll give you the number before we order.
Typically within a week, often sooner during off-season months. If the cap has failed completely and water is coming in, call (484) 600-2977 and we’ll get someone to the roof as soon as the schedule allows. We don’t leave an open flue exposed to weather any longer than necessary.
Honest answer: most Doylestown crowns we see can be coated, not rebuilt. If the cracks are hairline and the crown hasn’t crumbled at the edges, a flexible crown coating stops water penetration for years. If the crown has spalled or broken away around the flue tile, a rebuild is the only thing that works. We’ll show you the camera footage so you can see the difference yourself.
Get a Free Estimate on Your Olympia Chimney Cap or Crown in Doylestown
Call Top Hat Chimney at (484) 600-2977 for a free estimate. We’ll schedule a time, show up when we say we will, and give you the price before anything comes off the truck. Founded in 1999, still locally owned, still backing every job with the 90-Day Done Right Promise in writing.
Written by Wendell Pike, Owner, Top Hat Chimney at Top Hat Chimney, serving Doylestown and nearby areas.